| The MagicCleaner by Fronius is innovative technology for TIG weld seams and stainless steel surfaces! Unlike mechanical or chemical cleaning, the MagicCleaner doesn't affect the material surface and requires no exposure time. You can clean and passivate your stainless steel in just one step. Easily achieve a pristine finish to stainless steel! In addition, you can use the MagicCleaner to etch stainless steel- a simple alternative to laser engraving or stickers for printing logos or barcodes. Fronius offers two options, the MagicCleaner 150 and the MagicCleaner 300. Check out the specifications below to see which one is up to the task! |
 |
| The MagicCleaner 150 is ideal for both work sites and shops. It’s nearly ready out of the box, in just 2 steps. Plus, it’s a very portable 4.5 kg! It can clean and passivate TIG weld seams and stainless steel surfaces in one go with alternating current (AC) and electrolyte fluid. You can manually control fluid dosage making for cost-effective electrolyte consumption. Through electrochemical polishing, it removes some base material from the workpiece and lightens surface colouration. Set up is a breeze and you can easily control the operating mode, cleaning performance, and electrolyte dosing from the front panel. |
 |
| The MagicCleaner 300 is best suited for more intensive applications and longer TIG welds. The cleaning torch has a patented fume blow system that directs harmful vapors away from the operator, as well as an automatic cleaning agent supply. The tank is a bit larger than the 150 model, an integrated 1.8L tank vs a 100 ml attachable tube, allowing you to work for longer before refill. |
 |
| Removing post-weld temper colouration and restoring the protective passive layer at the same time has never been easier. Get consistent lustre after cleaning! Energy-efficient and lightweight, Fronius’ inverter technology offers reduced power consumption for the same output power. With lots of attachment options for cleaning welded pipes, undercuts, sharp edges or complex shapes and polishing linear weld seams, corner welds, t-joints and butt joints, you'll find plenty of uses for the MagicCleaner! |
 |
| Even after cleaning and polishing, this single machine can also permanently inscribe stainless steel surfaces- AC is used for black printing and DC for white printing! |
| | |
| Make room in your shop for this useful 3-in-1 tool and enjoy pristine stainless steel finish! Reach out by phone (410) 687-8400 or fill out the form to find out more about the MagicCleaner! | |
RSS Feed
